Welcome to the "How To" Page of Miata Speed Please as see my posts at www.mazda-speed.com under the complete how-to section

Bleeding Your Brakes click photos to enlarge

Step 1:Find a friend and gather the tools needed. An 8mm wrench and piece of flexible clear tubing

Step 2: Make it worth it!

Step 3: This is what your brakes look like. Remove the rubber cover for the bleeded

Step 4: Cap shown removed

Step 5: Place the wrench on the bleeder

Step 6: Place the hose on the bleeder.

Need Help?? Use this form Your name: Your email address: Is your boost gauge light opposite to the dash lighting? if yes then check the box Please type your Questions, comments, etc here and I will respond as soon as possible. Questions, Comments, etc:

Welcome To Miata Speed.com

Welcome To Miata Speed.com

Step 7: Have your friend push the brake pedal to the floor Step 8: open the bleeder Step 9: Close the bleeder once the pedal is on the floor Step 10: After its closed have your friend release his foot. Repeat until the fluid is the same color as the fluid your putting in. Then go to the next caliper! ** Dont forget to add fluid to the reservoir dont let it get below the low level**