How To Miata Speed Your Miata

Located here are the "how To" projects you can do yourself!!

Welcome to the "How To" Page of Miata Speed

Please as see my posts at www.mazda-speed.com under the
complete how-to section

Installing the Flyin
Miata intake Kit, GFB
BOV, & TB inlet pipe
click photos to enlarge

Step 1:Remove all intake,
tb, and stock diverter
valve piping starting with
the bolts on the intake
snorkel.

Step 2: Remove all bolts
and clips along with the
breather hose to remove
your stock air box.

Step 3: Remove the 2
MAF sensor bolts,
compressor outlet hose
and metal intake piping
and attached items.

Step 4: Remove the red
arrowed bolts and check
for any others ou may have
missed. Then pull out the
rest of the metal piping.

Now you see why you
don't hear the turbo!!
Look at that maze of
piping.

This is what it looks like
with everything gone.

Step 5: Please follow the photos. In addition locate a
piece of the stock diverter hose with white dots..
Underneath one of the dots is a restricter "pill" *not
shown in the photo* make sure its piped into the line
going to the intake <non boosted> side. That should
prevent the boost cut with out have to go with a
boost controller.

Step 6: Remove all piping
and the air temp sensor
<3/4" deep socket from
your stock TB intlet pipe.

Need Help?? Use this form

Your name:

Your email address:

Are you having trouble with
the Throttle Body Inlet
Pipe?if yes then check the
box

Questions, Comments,
etc:

Step 7: Connect the
intercooler hose, screw in
the air temp sensor with
the housing removed, and
attach to the throttle
body. Lastly connect the
vac / boost line to the end!

Welcome To
Miata Speed.com